Solitary strand sprocket with one set of teeth around the circumference for applications where a single chain can support the torque and load
Pitch of 3/4 inch for size 60 chains
Sprocket bore and hub with QD fittings for inserting and locking bushings into place
Type B sprocket with a hub projection using one side to accommodate various types of bushings to help prevent sprocket from slipping on the shaft
Sprocket teeth assist in preventing slipping and binding to avoid power loss in assemblies
This Tsubaki roller chain sprocket has a 3/4-inch pitch, fits size 60 chains, and is single strand with one set of teeth around its circumference for use with single strand chains. It is a Type B sprocket with a hub projection encircling the bore on one side, and both hub and bore have Quick-Disconnect (QD) fittings for inserting and locking into place different QD bushings based on the diameter of the shaft. One’s teeth of the sprocket help prevent slipping and binding to avoid power reduction in assemblies. It meets International Business for Standardization (ISO) 9001 for quality assurance. This solitary strand roller chain sprocket is certainly suitable for use in a broad range of applications involving light to moderate loads and ongoing, high-cycle functions, including automobile transmission systems, structure and agricultural apparatus, conveyors, and factory manufacturing and assembly lines, among others.
A roller chain sprocket is a thin wheel with deep, uniformly spaced tooth ringing its circumference. The distance from the peak of one tooth to another is called the pitch, and is commonly measured in 1/8-in . increments. The sprocket transfers power and movement by a roller chain that’s threaded over the teeth of the sprocket. The alignment of the chain with the sprocket’s pitch helps prevent the chain from slipping to ensure that no power is certainly lost. In the heart of the sprocket may be the bore (hole) for sliding the sprocket onto a shaft, and a bushing or bearing is usually often suited to the sprocket’s hub to custom made-suit the sprocket onto a shaft to carry it firmly in place. A hub is usually a protruding, elevated lip encircling the bore of the sprocket. Sprockets with hubs on both sides are Type C, sprockets with hubs using one part are Type B, and sprockets without hubs are Type A sprockets. For applications requiring sprockets to be swapped onto shafts of different diameters, a sprocket with a bore huge enough to match all shafts may be used, with the gap between your bore and shaft closed with a bushing or bearing. Roller chain sprockets are found in a broad selection of applications where the drive power of an engine needs to be transferred into movement, such as in motor vehicles, conveyors, escalators, agricultural, forestry and mining products, aeronautics, robotics and space exploration, among others.
U.S. Tsubaki Power Tranny manufactures a number of chains, sprockets, and various other power transmission parts that meet International Organization for Standardization (ISO) requirements for quality assurance. The company, founded in 1917, is certainly headquartered in Wheeling, IL.