900 SERIES PINTLE CHAINS, sometimes known as “sugar mill” or “intermediate carrier chain” is utilized extensively in sugar mills. Multiple strands of 900 Pintle Chain, available with a couple of holes per link, could be installed with overlapping beaded carrier slats to create a continuing apron conveyor for intermediate carrier provider.
The pin holes at the closed end of the 900 Class hyperlink are provided with smooth bushings which are press-fitted into the links and keyed into place. The bushings are renewable and will be powered out and replaced if they become worn. 900 Class Pintle Chain is designed with dual barrels, one on each part of the open end of the links, to accommodate double sprockets. The purpose of this driving technique is to remove the possibility of material build-up in the sprocket contact area, which often causes the chain to leap the sprocket. Weighty ribs rigidly reinforce these traveling barrels.
Our 900 Course chain links, with tensile power from 22,500 to 32,500 pounds, are available with large sliding areas to lessen chain wear and prolong chain life. Broad wearing areas and weighty cross sections synergy to provide a considerable link which is manufactured according to manufacturer’s specifications and can perfectly replace links created by other manufacturers.
Brutaloy sprockets for 900 Class Pintle Chain are readily available in 3.170 inches. 900 Class Pintle Chain should only be allowed to travel in a single direction; links should run in direction of their shut narrow end.
Obtainable in Transmission Drive Chain cottered construction just, 900 Class Chain is assembled with T-headed pins which are locked into place by two lugs cast upon the ends of the generating barrels to prevent pin rotation. Pin rotation during operation would lead to wear on the inside of the bushing. Both the mind of the pin and the cottered end of the pin are guarded by cast lugs on the barrel end of the links.
900 Class Pintle Chain are links cast of malleable iron or Promal (Duramal). It really is furnished with carbon steel temperature treated pins and carbon metal case hardened bushings as regular. However, stainless pins and bushings could be provided when specified.