Single and double reduction planetary equipment Plastic Gear Rack drives to be utilized with electric, hydraulic, surroundings motors or mechanical power insight from high speed, low torque sources to deliver reduced speeds at increased torques. The input aspect has regular SAE pads for electric motor mounting. Available in the three result configurations proven below. Many units could be furnished with an integral parking brake.
Solitary reduction drives are limited by 3500 RPM input; dual reduction drives to 5000 RPM. Units with integral parking input quickness is limited to 2500 RPM.The same torque is available in either direction of rotation. Torque rankings are intermittent. For continuous operation reduce torque rankings to about 1/3 to 1/2 the values shown. Devices provide 95% power tranny efficiency.

Wheel Drive
Input side has standard SAE pads and splined insight. Output part has hub for mounting vehicle wheel. Free wheel is possible by using the spring disconnect to disengage the drive shaft. The disengage feature is standard on all wheel drives.

Shaft Output
Input side regular SAE pads with splined insight. Output side choices include: Keyed round, hexed, hollow, tapered or splined shaft.

Spindle Drive
Input side is regular SAE pads with splined input. Output side has a flanged spindle for coupling to the load.

Swing Drives
Ever-Power model 6 is offered with or without integral parking brakes. The “SW” Power Wheel offers extra-large tapered roller bearings, a ductile iron hub and temperature treated ring gear to minimize backlash growth due to wear. The exterior bearing nut supplies the greatest in shaft retention and shaft power. Output could be a spindle shaft or various sizes of essential pinion gears.