Single and double reduction planetary equipment drives to be utilized with electric, hydraulic, air motors or mechanical power input from high swiftness, low torque sources to provide reduced speeds at increased torques. The input part has standard SAE pads for electric motor mounting. Obtainable in the three result configurations proven below. Many units could be furnished with an intrinsic parking brake.
One reduction drives are limited by 3500 RPM input; double reduction drives to 5000 RPM. Units with essential parking input acceleration is bound to 2500 RPM.The same torque comes in either direction of rotation. Torque rankings are intermittent. For constant operation reduce torque ratings to about 1/3 to 1/2 the values shown. Products provide 95% power transmission efficiency.
Wheel Drive
Input side has regular SAE pads and splined insight. Output aspect has hub for installation vehicle wheel. Free wheel is hydraulic planetary drive possible by using the spring disconnect to disengage the drive shaft. The disengage feature is usually standard on all wheel drives.
Shaft Output
Input side standard SAE pads with splined input. Output side options include: Keyed circular, hexed, hollow, tapered or splined shaft.
Spindle Drive
Input side is standard SAE pads with splined insight. Output side includes a flanged spindle for coupling to the load.
Swing Drives
Ever-Power model 6 is offered with or without integral parking brakes. The “SW” Power Wheel has extra-huge tapered roller bearings, a ductile iron hub and warmth treated ring equipment to reduce backlash growth caused by wear. The exterior bearing nut provides the greatest in shaft retention and shaft power. Output can be a spindle shaft or various sizes of integral pinion gears.