High power brushed DC equipment motor
Nominal Voltage: 12V DC
Includes 26.9:1 PG45 Gearbox
Output: 90RPM, 99.11oz-in
Hall effect encoder included
The EP 12V 90 rpm 99.11oz-in 1:26.9 Brushed DC Gear Engine w/ Encoder is shipped fully assembled with a 26.9:1 reduction PG45 Gearbox linked to a robust RS775 brushed DC motor. A hall impact sensor is installed to the rear shaft of the motor and functions as an encoder. Internal gears are metal. 6-pin 0.1″ spaced connector is roofed for convenience.
reduction ratio: 4,14,19,27,51,71,100,139,189,264,369,516,720, working temperature:-40~+60°c, PWM rate control and FG signal feedback. Offer overload current protection, Top quality, reasonable cost and excellent after-sales assistance, rotating speed is constant and can be produced as you necessary., Pls advise me your detail parameter(voltage, model Simply no, reduction ratio) of motor when you make the order., DHL, UPS, FedEx, TNT, EMS, China Post,Sea are available., Devliver time depends on the number you order. usually it takes 15-25 working days.
Ever-Power’s DC Planetary gearmotors are an inline option for low speed, high torque, and/or variable load requirements. These gear motors are created for intermittent duty procedure because the planetary gearbox configuration supplies the highest performance and best output torque of all our speed reducers. DC motors coupled with planetary equipment reducers are well suited for devices in the agricultural and structure industries. With 18 ratio options which range from 5:1 to 1000:1, we have a DC planetary gearmotor remedy to fit your needs.
For a smaller footprint and quieter gearbox design, look for our I-series Planetary gearmotors. Framework sizes 52cm, 62cm, and 81cm, 12 ratios which range from 5:1 to 308:1.
1/25 to 3/8 HP
12, 24, 90, 130, 180VDC, 115 FWR
.5 – 475 RPM
3.5 – 950 in-lb rated torque
Frame Size 60, 80, 108 mm
5:1 – 1000:1 standard ratios
Regular brush life of 2000+ hours (varies by application)
Brush DC Planetary Equipment Motors
Ever-Power supplies the EP line of small-framework fractional horsepower planetary gear motors.
Series are available equipped with PMDC brush motors or brushless DC motors. Brush DC planetary equipment motors are featured right here. (brushless planetary gear motors information is obtainable here.) Models with result torque ranked to as high as 8.8 Nm (1250 oz-in) are available.
Efficiency summaries for the brush DC planetary equipment motors are summarized in the desk below. Click the table links for comprehensive specification information.
Planetary Gear Motor Solutions
Ever-Power’ Planetary Gear Motors are an inline answer providing high torque in low speeds. Our Planetary Gear Motors offer a high efficiency and offer excellent torque output in comparison with other types of equipment motors. They can handle a different load with reduced backlash and are greatest for intermittent duty operation. With endless reduction ratio options, voltages, and sizes, Ever-Power includes a fully tailored gear motor solution for you.
A Planetary Gear Motor from Ever-Power features one of our numerous kinds of DC motors in conjunction with one of our uniquely designed epicyclic or planetary gearheads. A planetary gearhead consists of an internal gear (sun equipment) that drives multiple external gears (planet gears) generating torque. Multiple contact points over the planetary gear train allows for higher torque generation in comparison to one of our spur equipment motors. In turn, an EP planetary gear motor has the ability to handle various load requirements; the more equipment stages (stacks), the bigger the strain distribution and torque tranny.
Planetary Gear Motors
Planetary Equipment Motors Planetary Equipment Motors – 16mm 42mm Planetary Gear Motors – IG42GM 42mm Planetary Gear Motors – IG42GM Planetary Gear Motor Cut Aside 43mm Planetary Gear Motors – IG43GM
Features and Benefits
High Torque Capabilities
Sleek Inline Design
Capability to Handle Large Reduction Ratios
High Power Density
Our Planetary Equipment Motors deliver exceptional torque output and performance in a compact, low noise design. These characteristics furthermore to our value-added capabilities makes EP’s gear motors a great choice for all movement control applications.