We are committed to research and expansion of items that meet the increasingly sophisticated electronics industry and are widely used in computers, home appliances, consumer electronics, communications, info, industry, medical and various other fields.
We also offers patent for 360 degree AC PIN interchangeable type adaptor in fact it is leading the world’s exceptional design.

Ever-Power provides items which are small, lighter, more electrical power efficient, and easier to use.
We selling products around the globe and acquire the certifications for every of country. And also acquired ISO9001:2015 and ISO 14001:2015 etc. to make sure products meet up with the latest regulations.
Gear adapters install between the vehicle tranny and power take-off, and can serve several purposes. Most commonly, adapters are utilized to change the direction of rotation of the PTO result shaft. They can be used to space the PTO out and away from the transmission case. On some imported or Pto Adapter china non-SAE regular transmissions they allow for the mounting of standard 6-bolt electricity take-offs. Gear Adapters are available to match most popular transmissions.
Different body configurations: Can relocate the PTO output shaft to improve clearance for a driveshaft or direct-coupled pump
Changes PTO shaft rotation: Complements PTO rotation to that of the driven equipment
Standard and non-standard bolt patterns: Fits SAE normal PTOs to non-standard transmissions

• Frame constructed of 1/4″, 3′ x 3″ and 1/4″, 2″ x 2″ steel tubing
• Operates from skid steer hydraulics
Requires a minimum of 16 GPM; maximum of 22 GPM (produces 20 to 40 HP from the power remove)
• No need to modify vitality take off shafts
• Adjustable lower arms
• Reinforced durable universal mounting brackets
• Complete with motor, hydraulic hoses and toned faced couplers
• Perfect for three point electric power take off apparatus – snow blowers, mowers, tillers, post hole augers, etc

: Over-running clutches give a safe methods to protect operators and high-priced machinery from conditions when the inertia of PTO motivated put into action exceeds and over-works the tractor PTO velocity. When this happens, the over-working coupler will free-wheel
smoothly and properly. Over-jogging clutches will normally resist applications needing up to 65 h.p. at 540 rpm and 100 h.p. at
1000 rpm. Intense shock loads or travel line angularity will reduce this capability
If the length of your PTO will not fit correctly within a tractor, a PTO adapter can extend the size without having to replace it for a fresh one. This adapter comes with an overall length of 7-3/16″ with a male end 1-3/8″ x 6 spline and a lady 1-3/8″ x 6 spline end.
Create additional duration on the finish of your PTO. This tractor PTO shaft adapter provides both a lady 6 spline end and a male 6 spline end, each end has a diameter of 1-3/8 in. This enables more connection choices and is suitable for anyone that owns a mature tractor because the older parts may not be produced any more and so are less common.
The over-running coupler can be an essential part of PTO drive on rotary mowers, bailers, hay conditioners or any implement where inertia of driven unit may be required to over-run traveling source. The coupler drives solidly from tractor to put into practice and free wheels efficiently when apply exceeds tractor PTO speeds. All dimensions are nominal.
Converts a 1 1/8″ keyed spline to a 1 3/8″ 6 spline.
Necessary with 1000 RPM gearcase upgrade or 3 Point Hitch kit for the 25PTOC.
This Small 1000 (21 Spline) to 540 PTO Adapter is the perfect match for your Shop Dog. It might be easily carried in the Store Dog’s hitchpin and PTO adapter carriers.
This is also a terrific PTO adapter for tractor use. This adapter decreases the tractor’s PTO from 1-3/8″ x 21 spline to 1-3/8 6 spline (540) and extends the PTO shaft 4-1/8″. It comes with an overall length of 6-3/8″ and is rated for tractors up to 70 HP.