1.A connecting link of an O-ring Chain for general application is pre-coated with grease at the pins. Just before connection, verify the grease about the surfaces of pins, and in the event the amount of grease is small, apply grease with bare hands. (If gloves are employed, the grease are going to be absorbed by the gloves.)
Instance: When the connecting website link (I) of an O-ring chain for general application is
shipped, O-rings are fitted on the roots with the pins. When the O-rings come loose as a result of vibration for the duration of transport, refit the O-rings in to the roots on the pins.
In this case, be sure you return the grease collected with the roots in the pins to your central surfaces from the pins, more at portion A than at portions B shown in the over illustration. (Portions A is worn due to sliding using the bushings.)
two.The chain could be most quickly connected around the teeth of a sprocket. Engage the hyperlinks at each ends of the chain with the sprocket teeth and match connecting pins. In case the sprocket may be moved, the chain can also be linked over the loosened side.
three. Connecting procedure
1.Confirm that O-rings are attached towards the roots of your pins.
2.When the level of grease applied on the connecting pins is tiny, coat the pins with grease at the central portions.
3.Insert the connecting pins into the bushings on the inner links at the two ends.
four.Confirm that the grease is applied towards the entire face on the O-ring, and fit the O-ring onto the connecting pins.
5.Insert the connecting pins into the connecting plate and while pressing the connecting plate, set up the spring clip. Verify irrespective of whether the head (the end with no split) in the spring clip is turned during the feeding path on the chain. (See the following illustration.)
6.Be sure to confirm that the spring clip is securely fitted during the clip grooves on the connecting pins.
This completes jointing with the connecting website link. Note that grease to the surfaces of connecting pins and O-rings can be removed in the course of set up get the job done. In this instance, re-grease making use of the grease on the surface on the base chain or even the grease while in the polyethylene bag during which the connecting link was contained.