One strand sprocket with a single group of teeth around the circumference for applications where a single chain may support the torque and load
Pitch of 3/4 inch for size 60 chains
Sprocket bore and hub with QD fittings for inserting and locking bushings into place
Type B sprocket with a hub projection on one part to accommodate numerous kinds of bushings to greatly help prevent sprocket from slipping on the shaft
Sprocket teeth assist in preventing slipping and binding in order to avoid power loss in assemblies
This Tsubaki roller chain sprocket includes a 3/4-inch pitch, fits size 60 chains, and is single strand with one set of teeth around its circumference for use with single strand chains. It really is a sort B sprocket with a hub projection encircling the bore using one side, and both the hub and bore have Quick-Disconnect (QD) fittings for inserting and locking into place different QD bushings based on the diameter of the shaft. One’s teeth of the sprocket help prevent slipping and binding to avoid power loss in assemblies. It fulfills International Firm for Standardization (ISO) 9001 for quality assurance. This single strand roller chain sprocket is definitely suitable for use in a broad range of applications regarding light to moderate loads and ongoing, high-cycle operations, including automobile transmission systems, construction and agricultural gear, conveyors, and factory production and assembly lines, among others.
A roller chain sprocket is a thin wheel with deep, uniformly spaced tooth ringing its circumference. The length from the peak of one tooth to the next is called the pitch, and is commonly measured in 1/8-inch increments. The sprocket transfers power and motion by a roller chain that’s threaded over one’s teeth of the sprocket. The alignment of the chain with the sprocket’s pitch stops the chain from slipping to ensure that no power is certainly lost. In the heart of the sprocket is the bore (hole) for sliding the sprocket onto a shaft, and a bushing or bearing is often fitted to the sprocket’s hub to custom-fit the sprocket onto a shaft to carry it firmly set up. A hub can be a protruding, raised lip encircling the bore of the sprocket. Sprockets with hubs on both sides are Type C, sprockets with hubs on one side are Type B, and sprockets with no hubs are Type A sprockets. For applications requiring sprockets to be swapped onto shafts of different diameters, a sprocket with a bore large enough to fit all shafts may be used, with the gap between the bore and shaft closed with a bushing or bearing. Roller chain sprockets are found in a broad selection of applications where the drive power of an engine needs to be transferred into movement, such as in motor vehicles, conveyors, escalators, agricultural, forestry and mining tools, aeronautics, robotics and space exploration, among others.
U.S. Tsubaki Power Tranny manufactures a number of chains, sprockets, and additional power transmission elements that meet International Business for Standardization (ISO) standards for quality assurance. The company, founded in 1917, is headquartered in Wheeling, IL.