A chain and sprocket drive is a type of power transmission in which a roller chain engages with several toothed wheels or sprockets, found in engines as a drivefrom crankshaft to camshaft.
Ever-electric power is proud to inventory a wide selection of Sprockets along with this huge variety of agriculture, gardening, cooking food and outdoor items. We stand behind all 26,000 things we sell with this Satisfaction Guarantee. Customer Service is the cornerstone of 
our family business, and has recently been for over 50 years.
Application
Ever-power drive sprockets provide durable, reliable service and show replaceable tooth plates for easy field maintenance. Tooth plates for 102 and 142 series chain can be found with a segmental/symmetrical reversible tooth profile. The 142 DBL, TPL and also the 175 and 260 series use our nonsymmetrical profile.
Travel sprockets weren’t always made to be bolted in. At one time they were welded onto the final drive motor and had to be cut off when they were replaced. Ultimately, welded-on adapters were set up that allowed the sprocket to end up being bolted on, and newer designs utilize the bolted approach altogether.
When someone sends in a final drive motor for us to take a look at or?rebuild/reman, we advise them to eliminate the sprocket. We don’t want the sprocket in location to evaluate the electric motor and the added pounds (that can be significant) unnecessarily heightens your shipping costs.
Signs of Sprocket Wear
The teeth on a drive sprocket are where you search for wear . They must be tall and flat towards the end, not sharp or dished at the end. And the sprocket, and even more specifically its teeth, start to wear, its size becomes more compact. This causes what’s known as a pitch mismatch, where in fact the the teeth on the sprocket no more connect to the track backlinks as effectively. This can accelerate the don of the sprocket and reduce the efficiency of your equipment.
If your sprocket shows sign of excessive wear, then its time to replace it before it starts to cause abnormal track wear or begins to negatively affect the performance of your final drive engine.
Preventing Sprocket Wear
Among the key ways to prevent accelerated sprocket wear is to check the track pressure. If the strain is too tight, it will cause wear on the sprocket pearly whites. We’ve talked before about the importance of keeping the undercarriage clean, and the condition of the undercarriage can affect the track tension (especially if there is normally a build up of dried mud and debris). That’s the main reason we put so very much focus on keeping the undercarriage clean
Conclusion
With out a functioning drive sprocket, your track drive won’t have the ability to propel your equipment. Fortunately, there are methods to help your travel sprocket go longer: keep the track stress at a proper level and continue to keep your undercarriage clean.
DRIVE SPROCKET
The undercarriage of your track equipment should be inspected regularly. If you discover early wear or harm to your tracks, a worn sprocket could be the cause.
15 cogs / teeth
16.77 inches in diameter
12 equally spaced bolt holes
Fits the next Bobcat Compact Track Loaders: T180, T190, T550, T590
Parts can vary depending on your serial number.
All Ever-ability sprocket tooth profiles are induction sprockets hardened to 55 Rockwell C., and are replaceable. The alternative and repair of tooth plate segments does not require removal of the drive shaft, bearings, etc. Ever-power also designs custom split hub parts for retrofit applications that minimize field labor costs.
At initial glance, you might feel that if you’ve seen one drive sprocket, you’ve seen all of them. However, Ever-power possesses added an I.D. lip and spiral ring that captivate the needle bearing along with an exterior snap ring that boosts performance and reliability. While easy to overlook, it’s this attention to fine detail that the racer provides come to anticipate from Ever-power.
An I.D. lip and spiral ring that captivate the needle bearing
External snap ring caps sprocket about drum & increases durability
CNC-machined teeth include a corrosion-resistant finish
Specifics:
Chain Type: #219
Tooth Configuration: Standard
