Fan Engine, 1/8 hp 120V 2.2 Amp 3-Speed
General Explanation: New fan motor, taken off unused 18” or 24” China Air flow Compressor diameter TPI fans. Designed to run an 18” or 24” enthusiast blade (blade NOT included).
This motor includes a (detached) cord with grounded plug, motor capacitor and a 3-speed control switch. All of the wiring in the middle of your electric engine, capacitor and quickness control change is still hooked up nevertheless the cord itself is normally detached as seen in the photos. (Find “Control Notice” below for change type.)
T (See “Software Notice” below for make use of in various other applications.)
Measurements: The engine body is 5” diameter and 3 ½” long (excluding the 
shaft). The engine shaft is definitely½” (0.500″) diameter x 2 ½” lengthy with a collection screw simple. There are (4) threaded mounting lugs on the front of the motor, ½” lengthy x .16 dia. with washers and nuts. The studs appear to ‘ve got 4mm threads and to become on a 117mm (4.6”)diameter circle (3 ¼” measured from one stud to the next).
Rate: The approximate electric motor speeds (with a enthusiast blade attached):1660, 1550 and 1370 RPM. Direction of rotation (facing the shaft end of the electric motor) is Clockwise.
Control Take notice: Motors may come with The 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we’ve demonstrated BOTH variations in the images). Both of these types of switches both control the engine in the same way (but you have a rotating knob and you possess a pull-chain). In the event that you order several electric motor at a time, we can do our better to supply your purchase with each one kind of control or the excess.
Application Note: USUALLY DO NOT use this electric motor in a nonfan app. This is a totally enclosed fan electric engine and made to have constant ventilation over the engine casing for cooling. The housing isn’t electric fan motor china vented and the electric motor will overheat and enter automatic thermal overload if operate in a nonfan program where there isn’t strong ventilation past the engine. (Caution Note: the electric motor will restart immediately when it cools back off.) Using this electrical motor for applications aside from 18 & 24″ TPI fans may possibly also overload the motor and lead it to proceed into automated thermal overload. (Your lover blade from another producer may have a steeper blade angle.)
Origin: This electric engine is manufactured in China.