Fan Motor, 1/8 hp 120V 2.2 Amp 3-Speed
General Explanation: New fan motor, removed from unused 18” or 24” China Atmosphere Compressor diameter TPI fans. Made to run an 18” or 24” enthusiast blade (blade NOT included).
This motor comes with a (detached) cord with grounded plug, motor capacitor and a 3-speed control switch. All of the wiring in the middle of your electric motor, capacitor and quickness control switch is still installed however the cord itself is generally detached as observed in the photos. (Electric Fan Motor Discover “Control Notice” below for alter type.)
T (See “App Notice” below for make use of in a variety of other applications.)
Sizes: The engine body is 5” diameter and 3 ½” long (excluding the shaft). The engine shaft is certainly½” (0.500″) diameter x 2 ½” lengthy with a collection screw clean. There are (4) threaded mounting lugs on leading of the motor, ½” long x .16 dia. with washers and nuts. The studs appear to ‘ve got 4mm threads and also to become on a 117mm (4.6”)diameter circle (3 ¼” measured from one stud to the next).
Rate: The approximate motor speeds (with a enthusiast blade attached):1660, 1550 and 1370 RPM. Direction of rotation (facing the shaft end of the electrical motor) is Clockwise.
Control Take note: Motors 
will come with EITHER a 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we’ve demonstrated BOTH variations in the images). Both of these types of switches both control the engine in the same way (but you have a rotating knob and you possess a pull-chain). If you order several electric motor at the same time, we can do our better to supply your order with each one kind of control or the excess.
Application Note: Do NOT use this electric motor in a nonfan program. This is a completely enclosed fan electric motor and made to have constant ventilation over the electric motor casing for cooling. The housing isn’t vented and the electric powered electric motor will overheat and get into automated thermal overload if run in a nonfan program where there isn’t strong ventilation past the engine. (Caution Note: the electric motor will restart instantly when it cools back off.) Using this electrical motor for applications aside from 18 & 24″ TPI fans may possibly also overload the engine and lead it to proceed into automated thermal overload. (Your companion blade from another producer may possess a steeper blade angle.)
Origin: This electric electric motor is produced in China.