Flexible plastic equipment racks in 0.8 Mod (32DP) pitch. These racks can offer an easy to set up rotational drive of up to approx 270 degrees for instance on camera focus rings. They also provide an economical option where a big gear is necessary or a longer stretch (up to 2 metres) of linear movement is desired. These racks are appropriate for our 0.8 Mod and 32 DP pitch Spur Gears.
EVER-POWER share racks are created for high precision linear movement applications. You can expect a large selection of racks which range from module 0.5 to 10 and lengths from 100 to 2000 mm.
Hardened Ground Racks (MRGF – MRGFD) : Has the highest strength and precision in the EVER-POWER standard rack series. Bolt holes could be remachined as carburizing is certainly applied only within the tooth area. J Series products are also available.
Hardened Surface Racks (KRGF-H – KRGFD-H) : Temperature treated ground gears with high precision and strength has excellent cost-functionality ratio. J Series products are also available.
Hardened Racks (KRF-H/KRFD-H) : This is a strong rack made of Chromoly steel, treated simply by carburizing. Has high-strength, high wear resistance, and enables downsizing of SR racks. J Series products are also available.
Hardened Racks (SRF-H/SRFD-H) : Steady Hardened racks with high power, extended life span are reasonably priced. J Series items are also available.
Thermal Refined Ground Racks (KRG – KRGF – KRGD) : High strength and abrasion-resistant for precision linear motion.
Metal Racks w/ Machined Ends (SRAF – SRAFD – SRAFK) : This gear rack gets the same tooth height and face width sizes, smaller sized and reasonably priced in comparison to SRF Racks
Steel Racks (SR) : Low priced, large choices of modules and number of the teeth. J Series items are also available.
Steel Racks w/ Machined Ends (SRF) : Low priced, large choices of modules and number of teeth. J Series items are also available.
Racks with Bolt Holes (SRFD – SRFK) : Low cost, large choices of modules and quantity of teeth. J Series products are also available.
STAINLESS Racks (SUR•SURF•SURFD) : Suitable for food machinery due to SUS304 material\’s rust-resistant quality.
Plastic material Racks (DRF/DRFD/DRFK) : Plastic racks with small dimensional change, absorb lesser water than MC Nylon racks. J Series items are also available.
Plastic Racks (PR•PRF) : Produced form MC nylon, can be used without lubrication.
Brass Racks (BSR) : Little pitch racks made of free-cutting brass, excellent workability and high rust resistance.
Steel Round Racks (SRO – SROS) : Convenient in applications where the rack has the reciprocal movement. S Type is simple to install.
Stainless Steel Round Racks (SURO) : Same dimensions as SRO racks, except in stainless steel. Use where rust-resistance is necessary.
Surface Helical Racks (KRHG – KRHGF – KRHGFD) : Excellent items with high precision and strength, and low noise and abrasion characteristics.
Steel Helical Racks (SRH – SRHF – SRHFD) : Effective in reducing noise and vibration due to larger get in touch with ratio of helical gears.
Molded Versatile Racks (DR) : Found in applications due to its flexibility, where metal racks do no have this attribute. Pinions and accessories are also available.
Molded Flexible Rack Clamps (SRS) : Utilized to secure Molded Versatile Racks.
Molded Flexible Rack Pinions (SSDR) : Spur pinions used for molded versatile racks.
Flexible Rack Instruction Rails (ARL) : Guideline Rails for Molder Flexible Racks.
We offer as standard a wide selection of Racks in Metric and Imperial sizes. Spur Racks are available in Steel (En8) and up to 2 metres long. STAINLESS and Delrin (Plastic) Racks are created with Spur and Helical tooth forms, square and round sections up to 400mm in length. Alternative materials are available on request. Moulded Hostaform Racks are available to offer an economical alternative where less torque is required.
Variable stiffness can enhance the capacity for human-robot interacting. Based on the system of a versatile rack and gear, a rotational joint actuator called vsaFGR is usually proposed to modify the joint stiffness. The flexible gear rack can be regarded as a combination of a non-linear elastic component and a linear adjusting mechanism, providing benefits of compactness. The joint stiffness can be in the range of 217-3527 N.m/rad, in fact it is inversely proportional to the 4th-purchase of the apparatus displacement, and almost independent from the joint angular deflection, providing benefits of quick stiffness regulation in a short displacement of 20 mm. The apparatus displacement with regards to the flexible equipment rack is usually perpendicular to the joint loading drive, so the power necessary for stiffness regulating is really as low as 14.4 W, providing benefits of energy conservation. The high compactness, great stiffness range and low power price of vsaFGR are proved by simulations and experiments.
Flexible plastic gear racks in 0.8 Mod (32DP) pitch. These racks can offer an easy to install rotational drive of up to approx 270 degrees for example on camera focus rings. They also provide an economical solution where a large gear is required or an extended stretch (up to 2 metres) of linear motion is desired. These racks are compatible with our 0.8 Mod and 32 DP pitch Spur Gears.
EVER-POWER stock racks are made for high precision linear motion applications. You can expect a large selection of racks which range from module 0.5 to 10 and lengths from 100 to 2000 mm.
Hardened Floor Racks (MRGF – MRGFD) : Gets the highest strength and precision in the EVER-POWER regular rack series. Bolt holes could be remachined as carburizing is usually applied just within the tooth region. J Series products are also available.
Hardened Floor Racks (KRGF-H – KRGFD-H) : Heat treated surface gears with high precision and strength has excellent cost-functionality ratio. J Series products are also available.
Hardened Racks (KRF-H/KRFD-H) : This is a strong rack made of Chromoly steel, treated by carburizing. Has high-strength, high wear level of resistance, and enables downsizing of SR racks. J Series products are also available.
Hardened Racks (SRF-H/SRFD-H) : Stable Hardened racks with high power, extended life span are reasonably priced. J Series products are also available.
Thermal Refined Ground Racks (KRG – KRGF – KRGD) : High strength and abrasion-resistant for precision linear motion.
Metal Racks w/ Machined Ends (SRAF – SRAFD – SRAFK) : This gear rack has the same tooth elevation and face width sizes, more compact and reasonably priced compared to SRF Racks
Steel Racks (SR) : Low priced, large choices of modules and number of tooth. J Series products are also available.
Metal Racks w/ Machined Ends (SRF) : Low cost, large selections of modules and amount of teeth. J Series products are also available.
Racks with Bolt Holes (SRFD – SRFK) : Low priced, large choices of modules and amount of the teeth. J Series items are also available.
STAINLESS Racks (SUR•SURF•SURFD) : Suitable for food machinery due to SUS304 materials\’s rust-resistant quality.
Plastic Racks (DRF/DRFD/DRFK) : Plastic racks with little dimensional change, absorb lesser water than MC Nylon racks. J Series items are also available.
Plastic-type Racks (PR•PRF) : Produced form MC nylon, can be utilized without lubrication.
Brass Racks (BSR) : Small pitch racks made of free-cutting brass, excellent workability and high rust resistance.
Steel Circular Racks (SRO – SROS) : Convenient in applications where in fact the rack gets the reciprocal motion. S Type is simple to install.
Stainless Steel Circular Racks (SURO) : Same dimensions as SRO racks, except in stainless. Use where rust-resistance is necessary.
Surface Helical Racks (KRHG – KRHGF – KRHGFD) : Excellent items with high precision and strength, and low sound and abrasion characteristics.
Steel Helical Racks (SRH – SRHF – SRHFD) : Effective in reducing noise and vibration due to larger get in touch with ratio of helical gears.
Molded Flexible Racks (DR) : Found in applications due to its flexibility, where metallic racks do no have this attribute. Pinions and add-ons are also available.
Molded Versatile Rack Clamps (SRS) : Utilized to secure Molded Versatile Racks.
Molded Versatile Rack Pinions (SSDR) : Spur pinions used for molded versatile racks.
Flexible Rack Guideline Rails (ARL) : Guide Rails for Molder Flexible Racks.
We offer as standard a wide variety of Racks in Metric and Imperial sizes. Spur Racks can be found in Steel (En8) and up to 2 metres in length. Stainless Steel and Delrin (Plastic-type) Racks are created with Spur and Helical tooth forms, square and round sections up to 400mm in length. Alternative materials can be found on request. Moulded Hostaform Racks are available to offer an economical alternative where less torque is required.
Variable stiffness can enhance the capability of human-robot interacting. Based on the mechanism of a flexible rack and equipment, a rotational joint actuator called vsaFGR is certainly proposed to regulate the joint stiffness. The versatile gear rack could be regarded as a mixture of a non-linear elastic element and a linear adjusting system, providing benefits of compactness. The joint stiffness can be in the number of 217-3527 N.m/rad, and it is inversely proportional to the 4th-purchase of the apparatus displacement, and nearly independent from the joint angular deflection, providing advantages of quick stiffness regulation in a brief displacement of 20 mm. The gear displacement with respect to the flexible equipment rack is perpendicular to the joint loading push, so the power necessary for stiffness regulating is as low as 14.4 W, providing benefits of energy conservation. The high compactness, great stiffness range and low power cost of vsaFGR are proved by simulations and experiments.