Agricultural Gearbox
The agricultural gearbox is the main mechanical component of the kinematic chain of agricultural machines. It really is normally powered by the tractor power take-off via the PTO shaft and the gearbox drives. The operating torque can also be transmitted to the gearbox by hydraulic motors or belt pulleys, in addition to chain gears.
Agricultural gearboxes will have 1 input shaft and at least a single output shaft. If these shafts sit at 90° to one another, the gearbox is an ORTHOGONAL ANGLE gearbox or even more frequently called a right-position gearbox.

rotary tiller gearbox is certainly adopted middle equipment transmission system, mounted with the tractor of 12-80HP. Tractor wheel tracks are totally covered after tillage as the functioning width is much wider. The quality is reliable and the overall performance is well. So that it can be utilized on dry and paddy field. It can reduce the time, laboring, and price, etc. during operation

Increasers and Reducers
When the gearboxes have both gears with different numbers of teeth.
The gearbox is a reducer when the driving gear, i.electronic. the main one with the insight shaft, has the fewer quantity of teeth (pinion), hence the output shaft rotates slower than the input shaft.
It is named an increaser when the input shaft is mounted on the apparatus with the larger number of teeth (crown), therefore the output shaft rotates faster compared to the input shaft.
Right-angle gearboxes, distributors or rotational invert gearboxes
When the gearboxes have gears with the same number of the teeth.
The gearbox is known as right-angle when it only has two shafts (input and output),
whereas it really is called a distributor when there are at least two output shafts.
It really is called a rotational reverse gearbox and gearbox for agricultural machinery parallel offset in the versions with parallel shafts with two gearboxes.

Speed change
in addition to the main pair of gears and relevant shafts, the gearboxes may also have other gears with a different amount of teeth. The apparatus shift of the main couple of gears with the secondary types allows different speeds. The manual change of the secondary equipment set with gears with different quantity of teeth allows modifications to the result rotation speed.
CMR GROUP is able to design and manufacture also agricultural machinery applications.