The EP Greenhouse geared motor is a compact and lightweight reduction gear reducer with a limit switch system that’s suitable for assembly of a locally available electric electric motor. The gearbox can be used in manually-controlled or climate-controlled ventilation and display screen systems in greenhouses. The quick and easy-to-install EP geared motor is certainly rainproof and windproof. The gearbox has a high protection class (IP65) and can be used in an ambient temperature of 0-60 °C.
The low-noise geared motor for Greenhouse includes a gearwheel transmission and a worm wheel transmission, which are integrated in an aluminum precision housing. The self-braking worm wheel transmitting ensures that the drive shaft is certainly locked when the reduction gear motor is not running. The fully sealed reduction reducer has an growth chamber with a diaphragm to keep carefully the gear oil at a low pressure under all conditions, even at high temps. Thanks to the use of an growth chamber, the reducer can be installed in any position. There are no restrictions, since there is no need for a bleed connect. The sealed reduction geared motor keeps the gear essential oil of the gear motor in optimal condition for its entire operating life time. The gearbox is suitable for discontinuous use, operating course s3-30%, with a maximum activation period of 25 minutes.
The Gear box reduction gear driver has an FT85 motor assembly flange, to which the right IEC standard motor can certainly be installed (EN 50347).
The Gear box has a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off at the end positions. The limit switch system is installed within an included chamber and is enclosed by an impact-resistant plastic material cover. The limit switch system is obtainable and easy to adjust. The limit switch system’s optimum switching range is 40 or 64 revolutions of the drive shaft. The cabling is connected in spring-clip connections. The gear driver has an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.
The gear reducer for greenhouse includes 16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying chain couplings and assembly plates can be found as accessories.
Optimum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in case of software of 4-pole electric motor.
Protection class IP65.
Can be used in ambient temperatures of 0-60°C.
Suitable for discontinuous use, operating class s3-30%, maximum activation time 25 mins.
Equipped as regular with 16-tooth galvanised chain coupling 5/8″x3/8″.
FT85 motor assembly flange for installing IEC regular motor (EN 50347).
Maximum switching range of limit switch system 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).