Downsizing Your System with Larger Electrical power Chains
HK sort roller chains conform to H variety of ANSI, and their thickness of inner and outer link plates are equal to people from the upcoming bigger size chain. Consequently, HK sort roller chains are greater in tensile power by about 20%and in greatest allowable load by about 15% than those of regular roller chains. Since the bodyweight of your chains can be bigger, HK sort roller chains are suitable for the application of hefty duty at lower pace.
Suggested uses
?Optimal for places where increased strength is required but huge and heavier chains are unable to be made use of.
Choice of chains
Select a proper HK style roller chain depending on “Low-speed selection”
For the highest allowable load, see the next table of dimensions.
HK kind roller chains can be found up to triplex.
Sprockets
Use regular sprockets for a simplex HK roller chain Since the transverse pitches are bigger than those of standard chains during the situation of duplex or triplex, normal sprockets can not be made use of. Refer towards the sprocket tooth profiles 
for HK
Connecting website link and offset hyperlink
The tensile power of connecting links and offset hyperlinks are listed around the left, but the maximum allowable load is reduce than that from the base chain. Please check with us must you might have any inquiries. It truly is proposed to make use of the connecting link of interference-fitted (FJ, HJ)
Never ever make the holes with the connecting plate more substantial and by no means make the pins thinner to facilitate the do the job for fitting the pins in to the connecting plate, due to the fact otherwise the fatigue strength is going to be lowered.
Variety of chains
Select a good HK sort roller chain depending on “Low-speed selection”
For your optimum allowable load, see the following table of dimensions.
HK kind roller chains are available up to triplex.
Sprockets
Use typical sprockets for a simplex HK roller chain Since the transverse pitches are bigger than these of normal chains within the situation of duplex or triplex, regular sprockets are unable to be utilised. Refer for the sprocket tooth profiles for HK
Connecting link and offset website link
The tensile power of connecting hyperlinks and offset backlinks are listed to the left, but the optimum allowable load is lower than that of your base chain. Please seek advice from us should really you have any queries. It is advised to use the connecting link of interference-fitted (FJ, HJ)
Under no circumstances make the holes in the connecting plate bigger and by no means make the pins thinner to facilitate the get the job done for fitting the pins in to the connecting plate, since otherwise the fatigue strength are going to be lowered.
