We are focused on research and development of items that meet up with the increasingly sophisticated electronics industry and are widely used in computers, kitchen appliances, consumer electronics, communications, information, industry, medical and various other fields.
We also offers patent for 360 degree AC PIN interchangeable type adaptor and it is leading the world’s special design.
Ever-Power provides products which are smaller, lighter, more power efficient, and much easier to use.
We selling products all over the world and acquire the certifications for every single of country. And also acquired ISO9001:2015 and ISO 14001:2015 etc. to ensure products meet the latest regulations.
Gear adapters mount between the vehicle transmission and power take-off, and may serve several purposes. Most commonly, adapters are used to improve the route of rotation of the PTO end result shaft. They can be employed to space the PTO out and away from the transmission circumstance. On some imported or non-SAE common transmissions they enable the mounting of regular 6-bolt electric power take-offs. Gear Adapters are available to fit most popular transmissions.
Various body configurations: Can relocate the PTO output shaft to improve clearance for a driveshaft or direct-coupled pump
Adjustments PTO shaft rotation: Suits PTO rotation to that of the driven equipment
Standard and nonstandard bolt patterns: Suits SAE normal PTOs to nonstandard transmissions
• Frame constructed of 1/4″, 3′ x 3″ and 1/4″, 2″ x 2″ metal tubing
• Operates from skid steer hydraulics
• Requires a minimum of 16 GPM; maximum of 22 GPM (creates 20 to 40 HP off of the power take off)
• No need 
to modify ability take off shafts
• Adjustable lower arms
• Reinforced durable universal mounting brackets
• Complete with engine, hydraulic hoses and smooth faced couplers
• Perfect for three point ability take off equipment – snow blowers, mowers, tillers, post hole augers, etc
: Over-running clutches give a safe means to protect operators and pricey machinery from conditions when the inertia of PTO motivated apply exceeds and over-works the tractor PTO velocity. In such a case, the over-jogging coupler will free-wheel
smoothly and securely. Over-jogging clutches will normally stand up to applications needing up to 65 h.p. at 540 rpm and 100 h.p. at
1000 rpm. Extreme shock loads or travel line angularity will certainly reduce this capability
If the distance of your PTO does not fit correctly within a tractor, a PTO adapter can extend the size without needing to replace it for a fresh one. This adapter has an overall length of 7-3/16″ with a male end 1-3/8″ x 6 spline and a female 1-3/8″ x 6 spline end.
Create additional size on the finish of your PTO. This tractor PTO shaft adapter provides both a female 6 spline end and a male 6 spline end, each end includes a diameter of 1-3/8 in. This enables more connection options and is ideal for anyone that owns a mature tractor since the older parts might not be produced any longer and are less common.
The over-running coupler can be an essential part of PTO drive on rotary mowers, bailers, hay conditioners or any implement where inertia of driven unit may be required to over-run driving source. The coupler drives solidly from tractor to implement and free wheels easily when put into practice exceeds tractor PTO speeds. All measurements are nominal.
Converts a 1 1/8″ keyed spline to a 1 3/8″ 6 spline.
Necessary with 1000 RPM gearcase upgrade or 3 Point Hitch system for the 25PTOC.
This Small 1000 (21 Spline) to 540 PTO Adapter is the perfect match for your Shop Dog. It can be easily carried in the Shop Dog’s hitchpin and PTO adapter carriers.
This is also a good PTO adapter for tractor use. This adapter decreases the tractor’s PTO from 1-3/8″ x 21 spline to 1-3/8 6 spline (540) and extends the PTO shaft 4-1/8″. It has an overall amount of 6-3/8″ and is rated for tractors up to 70 HP.