Rugged construction Fashion “MD” Buckets are most well-known for standard objective elevators. Covering a broad variety of sizes from four to twenty inches lengthy, they’re applied for ?ne and medium dimension products such as coal, cement, pulp, grain, ear corn, and so forth. They can be broadly employed for hefty abrasive products such as sand, gravel, and stone. Reinforced front lips give Type “MD” Buckets an extended wearing digging edge. Uniform wall thickness and robust corner reinforcement make them stronger than steel buckets on the exact same gauge.They are smoothly surfaced and have ends sloped inward at six degree angles to insure correct ?lling and clean discharge. Available in Malleable and Al-lied-Locke Promal.
Chain for which buckets are available in-clude: Steel Bushed Roller, Steel Bushed, Mixture, “H” Class Mill, 400 Class Pin-tle, and 700 Class Pintle. “MD” Buckets are employed with G1, G6, K1, or K2 fashion attach-ments whenever they are available during the chain variety.
Capacities are for buckets ?lled for the line XX (see diagram). The sensible working capability will differ with all the loading disorders, angle of re-pose on the materials becoming dealt with, along with the incli-nation of your elevator.
Style “AC” ELEVATOR BUCKETS for dealing with cement, lime, and ?uffy materials
Fashion “AC” Buckets offer quick, thorough discharge of cement, lime, together with other dry, ?uffy resources. Vent holes inside the bottom of each bucket release trapped air in ?lling and let materials to empty from bucket quickly and fully on discharge. On top of that to reinforcing lips, hooded backs reinforce “AC” Style Buckets. This feature permits closer bucket spacing and offers 30% greater carrying capability than other bucket styles of the exact same length. These sturdy buckets have an extra thickness of metal at wear factors for longer service. Offered in Al-lied-Locke Malleable and Promal.
Type “AC” Buckets are often utilized with hefty duty engineering chain this kind of as Bushed Steel Chain with K2 and K3 type attachments.
Capacities are for buckets ?lled to both line XX or YY (see diagram). The useful operat-ing capability 
will differ with loading situations, angle of repose on the material getting handled, plus the inclination with the elevator.
