The high-end economy lines GSN & GFE combine high performance with financial efficiency: both lines are also built with helical ground gears, ensuring the very least noise level and smooth running. The full needle bearing offers been especially made to reach high torques that defeat the competition for systems of the same size. All planetary carriers are manufactured as a cage created from solid material. This increases calm operating characteristics while at the same time improving positioning accuracy and reducing backlash. Yet another shaft sealing band ensures maximum dust and splash water security relative to protection class IP65 in all lines.
One method to reduce backlash is to use precision gears. The concentrate on production in precision gears is tighter tolerances, so all over the gear will be a tighter, more precise suit. And the tighter fit means much less play in the apparatus teeth, which is the trigger of backlash in the first place. Of training course, precision gears are more expensive, but if the application demands high accuracy, then precision gearing could be the way to go.
From a gear design perspective, an easy way to lessen backlash is to ensure the teeth mesh tightly together. That is typically carried out by shortening the guts distance between gears. For pre-loading, this could be done using a spring mechanism to hold the gears firmly in place. This also eliminates the perform between your gear teeth and therefore eliminates backlash.
Of course, the kind of gears used can 
also have a large impact on the amount of backlash. So for instance, some gear types such as stress wave gears, or harmonic equipment drives, have zero backlash.
The GSD, GSB & GSBL high-end gearbox lines are constructed in a space-optimized, two-stage design. Because of the lower torque values, the input stage is usually dimensionally smaller compared to the output stage. Its short design makes the GSD range the ideal high-end gearbox for space restricted applications. The low standard backlash of the GSD series makes it an ideal fit for highly dynamic applications where highest positioning and acceleration accuracy is necessary. The flange output creates highest torsional rigidity. For the accommodation of especially high axial loads, taper roller bearings are optionally available in sizes with 90 mm diameter or more. The GSB line stands for high performance in combination with low backlash and high precision. Its robust, one-piece housing allows for a higher gearbox rigidity and the absorption of high radial and axial loads. The angular gearboxes of the GSBL collection provide same advantages as the GSB collection; the right angle form makes the GSBL range an ideal match for all powerful applications where space is limited.