The EP Greenhouse Gearbox is a compact and lightweight reduction gearbox with a built-in limit switch system that’s ideal for assembly of a locally available electric motor. The Gearbox is utilized in manually-managed or climate-managed ventilation and display screen systems in greenhouses. The quick and easy-to-installEP Gearbox is definitely rainproof and windproof. The Gearbox includes a high protection class (IP65) and can be used within an ambient temperature of 0-60 °C.
The low-noise Gearbox for Greenhouse has a gearwheel transmission and a worm wheel transmission, which are integrated in an aluminium precision housing. The self-braking worm wheel transmitting ensures that the drive shaft can be locked when the reduction gearbox isn’t running. The fully sealed reduction gearbox comes with an growth chamber with a diaphragm to keep carefully the gear oil at a minimal pressure under all circumstances, even at high temperature ranges. Thanks to the use of an expansion chamber, the Gearbox can be installed in any position. There are no limitations, since there is no need for a bleed plug. The sealed reduction gearbox keeps the gear essential oil of the Gearbox in ideal condition for its entire operating lifetime. The Gearbox is ideal for discontinuous use, working class s3-30%, with a maximum activation period of 25 minutes.
The Gear box reduction gearbox comes with an FT85 motor assembly flange, to which the right IEC standard motor can certainly be installed (EN 50347).
The Gear box includes a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off by the end positions. The limit change system is installed within an integrated chamber and can be enclosed by an impact-resistant plastic-type cover. The limit switch system is obtainable and simple to adjust. The limit change system’s maximum switching range can be 40 or 64 revolutions of the drive shaft. The cabling is connected in spring-clip connections. The Gearbox has an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.
The Gearbox for greenhouse includes 16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying chain couplings and assembly plates can be found as accessories.
Maximum drive torque of 150 Nm or 450 Nm.
gear reduction motor Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in the event of app of 4-pole electric motor.
Protection class IP65.
Can be used in ambient temperatures of 0-60°C.
Ideal for discontinuous use, operating class s3-30%, optimum activation time 25 mins.
Equipped as regular with 16-tooth galvanised chain coupling 5/8″x3/8″.
FT85 motor assembly flange for installation of IEC standard motor (EN 50347).
Maximum switching selection of limit switch system 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).