Worm drive gearbox with motor
A robust worm-drive gearbox powered by an MM28 engine. Ideal applications where an easy to fit, high torque output is required. Great for student based projects worm motor including robots and buggies.
The machine has been designed so that the output shaft can be ‘clicked’ in and out for modification. Electronic.g. reducing to size. The electric motor is snap fitted into its cradle to engage the gear and worm.
1 – 6V DC
0.1A to 1A depending on load
Driveshaft length: 12.5cm
Driveshaft diameter 3mm
Gearbox ratio: 42:1
General dimensions of box + motor: 35(W) x 40(H) x 60(L)mm
The primary feature of the high-efficiency gear box is a worm gear, which locks the output shaft whenever the engine is not turning. The high gear ratios of 216:1 or 336:1 get this to gearbox appropriate for small walking robots, lifting mechanisms, and additional applications where high torque is definitely desired.
The low-voltage motors in the worm gearbox run on 1.5-4.5 volts and draw up to some amps, making them ideal candidates for the DRV8833 motor driver carrier. Engine overheating can be due to excessive stalling, actually at suprisingly low voltages. We recommend that you utilize stall-detection sensors, or just view your robot, to make sure that it doesn’t stall for more than a few seconds at a time.
This gearbox includes a 4 mm diameter, round output shaft, which works with the wheels that are appropriate for Tamiya 4 mm, round shafts. Our 3 mm universal mounting hub also suits on small threaded end of the shaft, though it is not particularly intended to work with this kind of shaft (the hub’s set screw could harm the thread on the shaft).
Ever-Power equipment motors are economical, right-angle, worm-geared motors that install easily in the tightest applications. Economical correct angle worm geared motors set new criteria for reliability, performance and economy with unparalleled features which includes hollow shafts in the tiniest sizes. An inverter friendly design offers easy integration today and a future proof remedy. The Ever-Power gear engine offers total flexibility in mounting options includes shaft, base, face, and flange solutions. The engine terminal box could be mounted in option positions rotated in 90º steps around the motor frame offering for unparalleled integration options.
Ever-Power gear motors comply with North American and International criteria, including NEMA, IEC, CSA, and CE, the Ever-Power series allows for worldwide acceptance, a genuine total alternative for our global clients.
Superior protection of IP65 acc. to IEC 529 assures you that the Ever-Power series is dirt tight and hose evidence,and can be used outside or in wet and dusty conditions without the use of additional enclosures. Full rated output is available at the output shaft of the machine.
Power ranking up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Completely enclosed, sealed against dust and water spray
Lubrication change initial after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Standard), IP66 (Optional)
Connecting with Connect connectors.
With integrated inverter up to 7,5kW.
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to EN 60034
Corrosion category predicated on DIN ISO 12944-5
C1, C2, C3, C4, C5-I, C5-M
DC WORM GEAR MOTORS
Ever-Power DC worm gear motors are the answer for applications requiring a part turn, optional dual result, or an inability for the motor to be back again driven. The DC correct angle gear motors are made for continuous and intermittent duty procedure. Our right angle equipment reducers were created with several mounting plate options, making them perfect for a variety of DC electric motor based applications. We offer 12 ratios which range from 5:1 to 100:1.
1/43 to 3/8 HP
12, 24, 90, 130, 180 VDC, 115 FWR
9 – 475 RPM
1.5 – 315.9 in-lb rated torque
Frame Size 60, 80, 108 mm
5:1 – 100:1 standard ratios
Regular brush life of 2000+ hours (varies by application)
EP Products Worm Gear Motors are made to generate high torque in a small package size. Worm Equipment Motors are excellent for applications that want a personal- locking or breaking feature because the result shaft can’t rotate when there’s no power applied. Additionally, Worm Gearheads can transfer movement in 90 degrees. With various reduction ratios, precision cut gears, voltages and sizes, EP Items has a DC Worm Equipment Motor solution for the application.
Features and Benefits
HIGH Torque Capabilities
Self-Locking / Braking Features
Motion Transfer of 90 Degrees
Capability to Handle Large Gear Reduction Ratios
Protection Door Locks / Industrial Conveying Systems / Security Gates / Dental Chair / Ambulance Cots & Stretchers Quite a few DC Motors could be complimented with one of our Worm Gearheads. EP Items will continue to work with you to create and manufacture a Worm Gear Electric motor which will optimize the efficiency of your specific application.
Built to your unique requirements
Motor Type: Brushed / Brushless / Coreless
Shaft Material & Size
Shaft Configuration: (D Cut / Round / Splined / Other)
Overall Size Parameters (L, W, H)
Encoder Type: Optical / Hall Effect
Extra Assembly Requirements (lead wires, connectors, etc.)
The turbo metal gear worm engine runs on the metal gear box for sturdiness and a higher torque output. Due to the special mechanical framework of the worm drive the electric motor output shaft can be self locking and will not be rotated.
This part runs on the two wire connection and supports direction control and also PWM speed control. Ranked voltage is 12v and will accomplish 40RPM, with a torque of 8kg/cm.
Operating Voltage: 6 – 15 V
Rated Voltage: 12V
No-load Speed: 40 RPM
No-load Current: 35 mA
Rated Torque: 32 RPM
Rated Current: 180 mA
Rated Torque: 2.2 kg.cm
Rated Power: 1.1 W
Stall Torque: 8 kg/cm
Stall Current: 1 A
Reduction Ratio: 1:150
Weight: 167 g
EP Geared Motors with Worm Gearing – Modual & Customizable drive technology
Worm gear devices from EP DRIVESYSTEMS especially display their power in applications where high gear ratios are necessary. Our worm geared motors are as a result optimally suited for make use of in intralogistics, packaging technology and the meals & beverage industry.
Four great reasons for EP worm geared motors:
Our worm geared motors have a high overload capacity
Washdown versions allow simple and efficient cleaning of the drive program.
The NSD tupH sealed surface conversion is exceptionally chemical, corrosion and abrasion resistant.
Our modular style give users maximum freedom.
The modular system for maximum flexibility: Our EP worm gear units
There are numerous applications that require drive systems, and each one of these has its unique requirements. The EP series worm equipment motors can be quickly and effectively adapted to fulfill your needs.
Worm gear systems impress with their high power density and compact design. If required, we are able to also supply them with the highly effective nsd tupH surface area treatment.
As well as the basic EP housing, you can expect an extensive type of bolt-on parts to customize the merchandise including torque arms, shaft covers and output flanges. These could be easily field installed, but we may also be glad to assemble the average person components for you.
Discover more about our modular SI worm geared motors!
Find out more
Soft and Clean: The EP worm equipment unit SMI
SMI worm gear units feature a simple, corrosion-resistant alluminum alloy housing. Optional nsd tupH surface area conversion makes the product ideally suited for harsh and challenging industries like food processing and pharmaceuticals.
Versatile input designs such as NEMA, IEC or direct motor mounts in extra foot or flange mounted housing designs.
Worm geared motors
Worm geared motors for little power range.
The WATT small worm gear unit adapt themselves concerning UNIBLOCK design optimally in the geared engine program. The units possess on all sides different repairing possibilities and enable a simple assembling for the customer.
Additional drive configurationscan be designed by use of built-on add-ons (e.g. torque arm and output flanges). The housings are created in light weight building out of aluminium die cast. Engine attachment is realised in general by way of IEC adapter B5 or B14A.
Number of sizes:5
Power Range:0.12 – 2.2kW
Output torque range:17 – 230Nm
Ratio:5 – 100
Output option:result shaft, result shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/installation:uniblock, flange, torque arm
Buy Worm Drive Gearbox with Engine – incorporating the following features: 1 to 6V voltage rating, 17100 rpm no load quickness, 220g-cm stall torque, 3mm shaft diameter, 60mm long, 35mm wide, 40mm high, a robust worm drive gearbox powered by an MM28 motor (included), most suitable for applications where a simple to match, high torque result is required, nylon housing and gear, requires light oil or silicon grease lubrication, ideal for student based tasks including robots and buggies.
Most suitable for applications where a simple to match, high torque output is required
Ideal for student based tasks including robots and buggies
Reversible High torque Turbo Worm Gear Motor JGY370 DC 12V 40RPM
Reversible High torque Turbo Worm Gear Motor JGY370 DC 12V 40RPM
The engine is Gear DC engine with micro-turbine worm, you can change the wiring-connection to change motor rotation.
Turbo worm geared electric motor with self-lock, that’s, in the case of motor without electrical, the output axis is certainly fixed, self-lock.
The reducer output shaft arranged vertically with the engine shaft, whole electric motor output shaft relatively-short than general gear engine, trusted to be installed the dimensions requirements strictly occasion.
No load speed: 40r/min
Output torque: 5.6kg.cm
Rated current: 0.06A
Application: open the home window, door, Mini winch. Ect.
In sumo robot or combat robot competition where high holding torque’s motor is essential to avoid your robot being pushed by your opponent robot. The worm gear is certainly a better option compared to the spur gear motor. How come worm gear so unique? Take a look wiki out: Worm Drive.
“Unlike with ordinary equipment trains, the path of transmission (insight shaft vs output shaft) isn’t reversible when working with large reduction ratios, because of the better friction involved between the worm and worm-wheel, when usually a single start (a single spiral) worm can be used. This can be an advantage when it’s desired to remove any possibility of the result driving the input.”
In other terms, it is hard to push your load (example, your robot) if the motor is not power or rotate.
Features and Spec:
Metal gear box
Output shaft is self-locking due to the worm gear’s characteristic
Rated voltage: 12V DC
Rated output speed: 150 RPM
Rated output torque: 117mN.m (1.2kgf.cm)
Stalled torque: 196mN.m (2kgf.cm)
No load current: 60mA
Stalled current: 1.8A
Output shaft diameter: 6mm with 4.5mm slot
Worm drive gearbox with motor